LEVOLORBasics Cordless Blackout Fabric Roller Shades, White, 35" W x 72" H
Home/ Living/ cordless roller shades
11 Best Cordless Roller Shades
Published 10/19/2026
A cordless roller shade is a fabric panel that rolls onto a tube at the top of the window, with no pull cord. We compared eleven on width, fabric, and whether the shade mounts inside or outside the frame. Each pick notes the window measurement we would take before ordering.
Our top picks
Swipe →CHICOLOGYCordless Roller Shade for Indoor Windows, Chalk White, 48x72
PersiluxLight Filtering Roller Shades for Window Blinds,Cordless,Linen…
PersiluxBlackout Roller Blinds for Windows, Cordless Free-Stop Roller…
TWODRAPESBlackout Roller Shades for Bedroom Window Cordless Free-Stop…
sunoffBlackout Cordless Roller Shades Blinds,23" W x 72" H,White
AOSKYBlackout Cordless Roller Shade for Indoor Windows, 23"W x 72"H, Black
CHICOLOGYCordless Roller Shade for Indoor Windows, Urban White, 29x72
TWODRAPESBlackout Roller Shades Cordless Blinds for Indoor Windows,…
AOSKYCordless Blackout Roller Shades, 34" W x 72" H, Black
Compare cordless roller shades
Side-by-side tradeoffs for this shortlist. Swipe sideways to compare.
| Pick | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Best for | Living rooms wanting a finished, warrantied shade | Renters who cannot drill the window frame | Wide living room windows | Bright living rooms that want daytime privacy | Sunny living rooms needing real darkness | Living rooms wanting warm linen and full darkness | Narrow living room windows facing hard sun | Drafty windows in a dark-toned room | Living rooms that want daylight, not darkness | Living rooms wanting texture with full darkness | Tall living room windows needing real darkness |
| Dimensions | 35 in | 36 in | Roller shade | 64 in | 35 in | 34 in | 23 in | 23 in | Roller shade | 34 in | 34 in |
| Min. room | Measure the glass width, then the frame, before you order an inside mount | An outside mount needs extra width past the trim on both sides | Confirm the shade width is the cloth, not the bracket span | A single panel on a wide window leaves a gap at the sides | Check the depth of the window well if the shade must sit inside the frame | Cordless lift means the shade stops where you leave it | A blackout cell blocks more light than a light-filtering cell | Measure the height from the mount point to the sill | Two shades side by side need a gap so the brackets do not collide | A tall window needs a shade that reaches the sill when it is down | Confirm the brackets are in the box before you drill |
| Assembly | Moderate · about 2 hours, two people | Easy · about 1 hour, one or two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people | Moderate · about 2 hours, two people |
|
HS score
Methodology: The House Staples Score is our 0–5.0 analytical rating of a product’s capacity, materials, and construction standards, independent of crowd-sourced user reviews. | 4.6 | 4.5 | 4.5 | 4.4 | 4.4 | 4.3 | 4.2 | 4.2 | 4.1 | 4.1 | 4.0 |
| Notes | Measure your window at the top, middle, and bottom, because older frames are rarely square and the tightest of the three is the number that decides the order. · If you go with an outside mount, add two to four inches of width over the opening so the fabric overlaps the frame and blocks the edge glow. | Wipe the mounting surface with alcohol and let it dry fully before pressing the tape down, since most failures come from dust under the adhesive. · Check that the 36 by 72 inch size includes two clips, two tubes, and one connector when you open the box, because the parts count changes with the size. | Order the exact width of your window opening, since the fabric and length are pre-set and cannot be cut down after delivery. · Give yourself enough depth inside the frame for the roll to turn freely, because a 48-inch shade rolls to a thicker tube than a narrow one. | For an outside mount, add at least four inches to the window width so the fabric still covers the opening once you account for the 0.8-inch difference between fabric and shade width. · The accessory kit includes brackets, magnets, and screws, so the only thing you need to supply is a drill and a level. | On an inside mount, the 0.8-inch fabric shortfall lets a thin line of light down each side, so an outside mount at least four inches wider than the window is the better choice if total darkness matters. · The hardware and installation guide come in the box, and you can order a custom size if 35 inches does not land on your opening. | Measure the window width before you choose a mount, because an inside mount wants the exact width or up to an inch less while an outside mount needs 4 inches more. · The kit comes with metal brackets, magnets, and screws, so the only thing you need to supply is a drill and a level. | Measure the depth of your window casing before ordering, since the brackets need at least 2 inches to seat cleanly inside the frame. · If you want full darkness with no side gap, mount it on the wall above the opening so the fabric overlaps the frame on both sides. | If your window is 30 inches wide, order 34 inches for an outside mount so the fabric clears the opening on both sides. · Dust settles visibly on dark polyester, so plan on wiping the roll down with a dry cloth every few weeks. | Order to the exact window width you measure, since neither the width nor the 72-inch length can be cut down after it arrives. · Check the images for the fabric type attached to each color before you buy, because blackout and light filtering share the same product page. | For an outside mount, add four inches or more to your window width so the valance overlaps the frame and the edges stay dark. · Because the fabric is 0.6 inches narrower than the valance, measure to the valance number rather than the fabric when you are fitting it inside a tight casing. | Free-stop shades hold wherever you release them, so give the bottom bar a firm push upward and let go rather than easing it slowly. · On a 72-inch drop the rolled fabric sits thick at the top, so check that your window has a few inches of clear depth above the glass before an inside mount. |
| $ / size | $49.99 · 35 in | $13.19 · 36 in | $29.98 · Roller shade | $68.99 · 64 in | $56.99 · 35 in | $59.62 · 34 in | $25.99 · 23 in | $25.99 · 23 in | $39.99 · Roller shade | $56.99 · 34 in | $53.99 · 34 in |
| Shop | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review | Buy on AmazonRead review |
Our picks, explained
LEVOLOR Basics Cordless Blackout Fabric Roller Shades, White, 35" W x 72" H
$49.99
The white fabric carries a blackout coating on the back, which darkens a living room without making the street side of the window look odd. It arrives at 35 inches wide, and because the brackets eat into that, the fabric itself rolls about 1.5 inches narrower, so you should order at least a quarter inch under the tightest measurement of your window opening for an inside mount. The open roll headrail comes with bracket covers in the shade color, which hides the hardware that most budget shades leave exposed. Skip it if you want total darkness at the edges, because inside mounting always leaves small side gaps and only an outside mount closes them.
Product specs
- Dimensions
- 35 in
- Material
- Fabric upholstery
- Size
- 35 in
- Min. room
- Measure the glass width, then the frame, before you order an inside mount
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Living rooms wanting a finished, warrantied shade
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The blackout coating sits on a liner behind the white face, so the room darkens while the window still reads as plain white from outside.
- Color-matched bracket covers come with it, which conceals the mounting hardware instead of leaving metal brackets in view.
- It is backed by a limited lifetime warranty, which is unusual at this price and matters if a spring mechanism gives out in year three.
What to keep in mind
- At 35 inches wide and non-trimmable, it only suits a window measured to match, so you cannot adjust the fit after it arrives.
- Light will leak at the sides on an inside mount, so anyone who needs a fully dark room has to mount outside the frame and lose the recessed look.
LazBlinds 100% Blackout Roller Shades, 36"x72", Black
$13.19
It mounts with industrial grade hook and loop tape that sticks to painted wall, tile, glass, wood, or metal and pulls off later without leaving residue, so nothing gets drilled. The polyester fabric has a blackout backing that blocks all light, and the 36 by 72 inch size ships with two clips, two tubes, and one connector that you use to raise and lower it by hand. You can cut the width down at home if your window is narrower, which is the real reason to choose it over a fixed-size shade. Skip it if you want a shade you operate with one quick tug, because the clip system is more fiddly than a spring roller.
Product specs
- Dimensions
- 36 in
- Material
- Glass / metal
- Size
- 36 in
- Min. room
- An outside mount needs extra width past the trim on both sides
- Assembly
- Easy · about 1 hour, one or two people
- Best for
- Renters who cannot drill the window frame
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The width is trimmable at home, so one panel can be cut to fit an odd opening instead of returned.
- The adhesive tape holds on glass and tile as well as wall, which covers window types where screw brackets have nowhere to bite.
- The blackout backing stops all light through the fabric, which makes it usable in a living room that doubles as a movie room.
What to keep in mind
- Raising and lowering means working the included clips rather than pulling a bottom rail, so it is slower to adjust several times a day.
- The adhesive needs a clean, flat, dry surface to grip, so textured or freshly painted trim is a poor host for it.
CHICOLOGY Cordless Roller Shade for Indoor Windows, Chalk White, 48x72
$29.98
The tightly woven fabric rolls up without a boxy valance, so a wide living room window keeps a clean line across the top. It screws into the wall or frame with included metal brackets, and installation is genuinely three steps once you have a screwdriver or drill in hand. Note that the same product page covers both a light filtering fabric and a separate blackout fabric, so check the images for the color you are choosing before you order. Skip it if you rent and cannot make holes, or if you need to trim the width, because the 48 inch size is fixed.
Product specs
- Dimensions
- Roller shade
- Material
- Metal
- Size
- Roller shade
- Min. room
- Confirm the shade width is the cloth, not the bracket span
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Wide living room windows
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The 48-inch width covers a picture window that most single roller shades cannot span without pairing two.
- The low-profile roll skips a bulky headrail, so the shade does not visually drop the top of a tall window.
- Metal brackets and screws come in the box, which gives a wide, heavier shade a mount that will not sag over time.
What to keep in mind
- The fabric type depends on which color you pick, so choosing by color alone can land you with light filtering when you wanted room darkening.
- It is spot clean only and meant for dry indoor rooms, which rules out a steamy bathroom or a window over a kitchen sink.
Persilux Light Filtering Roller Shades for Window Blinds,Cordless,Linen…
$68.99
The fabric is linen that passes light through while staying opaque to anyone looking in, which makes it a daytime shade for a living room rather than a sleeping shade. It measures 34 1/2 inches wide by 64 inches tall, and because the fabric runs 0.8 inches narrower than the stated width, an inside mount needs a window opening no wider than the shade and under 64 inches tall. Both the square aluminum cassette at the top and the bottom rail are wrapped in the same fabric, so the hardware disappears into the shade. Skip it if you need the room dark, because cream linen at this weight still glows at midday.
Product specs
- Dimensions
- 64 in
- Material
- Linen-look fabric
- Size
- 64 in
- Min. room
- A single panel on a wide window leaves a gap at the sides
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Bright living rooms that want daytime privacy
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The linen is cut with a laser, so the side edges stay clean and do not fray along a 64-inch drop.
- Magnets sit inside the bottom rail and the kit adds more, which holds the hem flat against a door or wall so the shade does not swing when the door moves.
- The cordless lift stops wherever you let go, so you can leave it halfway down to cut glare on a screen without hunting for a set position.
What to keep in mind
- Light passes straight through the cream linen, so it will not darken a room for a nap or a movie.
- The 64-inch drop is the shortest of the Persilux pair here, so taller living room windows need the 72-inch shades on this list instead.
Persilux Blackout Roller Blinds for Windows, Cordless Free-Stop Roller…
$56.99
It is a 35-inch wide by 64-inch tall blackout roller with a thermal coating behind the fabric, so it blocks morning light and takes some of the heat off a sunny window. The valance is square frosted aluminum with a matte finish rather than fabric wrapped, which reads a little more modern than the TWODRAPES beige linen shade. The free-stop mechanism holds the shade at any height you leave it, and the bottom rail is wrapped in the shade fabric. Measure carefully before ordering, because the fabric is 0.8 inches narrower than the valance and that gap shows at the edges on an inside mount.
Product specs
- Dimensions
- 35 in
- Material
- Fabric upholstery
- Size
- 35 in
- Min. room
- Check the depth of the window well if the shade must sit inside the frame
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Sunny living rooms needing real darkness
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The thermal coating sits behind the blackout layer, so the shade cuts heat gain at a west window as well as light.
- The frosted aluminum valance is polished to a matte finish and the side screws are color matched, so the hardware does not catch the eye.
- The free-stop system uses no chain or cord at all, which keeps a loop out of reach in a room where children play.
What to keep in mind
- The 64-inch height limits it to shorter windows, so a standard tall living room window will leave fabric short of the sill.
- An aluminum valance cannot be repainted or recovered the way a fabric-wrapped cassette can, so you are committed to the white finish.
TWODRAPES Blackout Roller Shades for Bedroom Window Cordless Free-Stop…
$59.62
This is a 34-inch wide by 72-inch tall blackout roller shade in a beige oatmeal linen, with a free-stop mechanism that holds wherever you push or pull it. The valance is made from the same fabric and wraps the top shell completely, which closes off the light that usually escapes around an exposed roller. Pay attention to the sizing rule before you order, because an outside mount wants at least 4 inches more width than the window and the fabric panel itself runs 0.6 inches narrower than the valance measurement. Skip it if you want a shade that reads as crisp white, since the oatmeal tone is warm and visibly textured.
Product specs
- Dimensions
- 34 in
- Material
- Linen-look fabric
- Size
- 34 in
- Min. room
- Cordless lift means the shade stops where you leave it
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Living rooms wanting warm linen and full darkness
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The fabric valance wraps the aluminum top shell completely, so the seams and the roller tube stay hidden and the top edge does not leak a line of daylight.
- The bottom rod is wrapped in the same linen, which keeps the weight even across the width and makes the hem pull down smoothly instead of skewing.
- The free-stop system stops at any height you let go of, so you can set it halfway down over a sofa and it stays there without a cord or a chain.
What to keep in mind
- The 72-inch drop is meant for windows under 72 inches on an inside mount and under 68 inches outside, so a tall living room window will come up short.
- The beige oatmeal linen has an open, slubby texture that shows dust more readily than a smooth vinyl face, and linen is harder to wipe clean.
sunoff Blackout Cordless Roller Shades Blinds,23" W x 72" H,White
$25.99
The shade measures 23 inches wide by 72 inches tall, and because the fabric runs 22 inches wide, the brackets are counted inside that total rather than added to it. The polyester has a full blackout coating that stops sunlight and holds room heat in winter, so it suits a west-facing living room window that bakes in the afternoon. A spring system handles the lift, which means you pull the bottom rail down to where you want it and it stays, then returns to the top when you tug and release. Skip it if your window casing is shallower than 2 inches, because the brackets need that depth to sit inside the frame.
Product specs
- Dimensions
- 23 in
- Material
- Fabric upholstery
- Size
- 23 in
- Min. room
- A blackout cell blocks more light than a light-filtering cell
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Narrow living room windows facing hard sun
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The fabric is a 100% polyester blackout coating, so it blocks light rather than just dimming it and keeps summer heat off the glass.
- At 23 inches wide it fits the narrow side windows and door glass that most stock shades overshoot.
- The quoted width already includes the mounting brackets, so you can order to the frame opening without doing arithmetic first.
What to keep in mind
- The fabric is one inch narrower than the shade width, so a half-inch of light will edge down each side on an inside mount.
- Only 72 inches of drop is available, which leaves taller living room windows short at the sill.
AOSKY Blackout Cordless Roller Shade for Indoor Windows, 23"W x 72"H, Black
$25.99
It is a 23 by 72 inch roller in black with a 22-inch fabric panel, finished with a thermal coating on the back that slows heat moving through the window in both directions. The spring mechanism is rated for 5,000 lifting cycles on the product page, and it stops anywhere you leave it rather than snapping to fixed positions. The maker gives clear sizing advice, suggesting you add 4 inches to the window width for an outside mount and order at or just under the opening for an inside mount. A dark shade shows dust and creases more plainly than a pale one, so think twice if your living room gets strong raking light.
Product specs
- Dimensions
- 23 in
- Material
- Metal
- Size
- 23 in
- Min. room
- Measure the height from the mount point to the sill
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Drafty windows in a dark-toned room
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The thermal backing works against both winter heat loss and summer gain, which matters on single-pane glass more than the color does.
- The spring has been cycle-tested to 5,000 pulls, so daily use should not wear the lift out quickly.
- The package includes screws, metal brackets and instructions, so the only tool you have to find is a screwdriver or drill.
What to keep in mind
- Black fabric reads as a solid dark rectangle when the shade is down, which can make a small living room feel closed in.
- The height is fixed at 72 inches and cannot be trimmed, so a short window leaves excess roll at the top.
CHICOLOGY Cordless Roller Shade for Indoor Windows, Urban White, 29x72
$39.99
The Urban White shade is 29 inches wide by 72 inches tall and raises by hand at the bottom rail, with no headrail box sitting proud of the window. The fabric is a woven polyester rather than a coated blackout sheet, and this color is one of the light filtering options, so it softens daylight and keeps privacy without darkening the room. Metal brackets and screws come in the box, and the install is a matter of fixing the bracket, attaching the headrail and snapping the shade in. Skip it if you need a no-drill solution or a shade you can trim, because the width and length are fixed and there is no adhesive option.
Product specs
- Dimensions
- Roller shade
- Material
- Metal
- Size
- Roller shade
- Min. room
- Two shades side by side need a gap so the brackets do not collide
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Living rooms that want daylight, not darkness
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The woven fabric and low-profile head give the window a flat, tailored look without a bulky valance across the top.
- Screw-mount metal brackets hold far more securely over years than tension or adhesive fittings on a 72-inch drop.
- At 29 inches wide it covers the common mid-size living room window that 23-inch shades leave short.
What to keep in mind
- The light filtering fabric in this color is not room darkening, so a television glare problem or a daytime nap will not be solved by it.
- It is spot clean only and meant for dry indoor rooms, which rules out a steamy bathroom or a kitchen window over the range.
TWODRAPES Blackout Roller Shades Cordless Blinds for Indoor Windows,…
$56.99
The fabric is 100% linen with a blackout backing, and the same material wraps both the aluminum top shell and the bottom rod, which hides the seams and keeps light from spilling over the top. At 34 inches wide by 64 inches tall it is sized for shorter windows, since the height is meant for openings under 64 inches on an inside mount and under 60 inches if you mount it outside the frame. Keep in mind that the fabric panel measures about 0.6 inches narrower than the valance, so order the exact window width or up to an inch less for an inside mount. Skip it if your windows are tall, because the AOSKY shade on this list runs eight inches longer.
Product specs
- Dimensions
- 34 in
- Material
- Linen-look fabric
- Size
- 34 in
- Min. room
- A tall window needs a shade that reaches the sill when it is down
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Living rooms wanting texture with full darkness
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The valance is made from the same linen as the shade and wraps the aluminum shell completely, so you do not see a bare metal tube or a seam at the top.
- Laser-cut edges mean the linen will not fray along the sides the way a sewn hem can loosen over a few seasons.
- The mounting kit arrives with metal brackets, magnets, and screws, so nothing extra has to be bought before you start.
What to keep in mind
- The 64-inch drop is short for a standard living room window, and outside-mount use shrinks the usable window height to under 60 inches.
- The linen texture shows dust more readily than a smooth coated face, so it needs an occasional pass with a vacuum brush.
AOSKY Cordless Blackout Roller Shades, 34" W x 72" H, Black
$53.99
This is a free-stop blackout shade measuring 34 inches wide by 72 inches tall, so it covers the taller windows that the 64-inch linen shade cannot reach. Both the upper and lower rods are aluminum alloy with a frosted finish, which gives the bottom bar enough weight to hang straight and keep the roll even. The fabric carries a heat-insulating coating rather than a loose liner, so it blocks light and cuts heat transfer in one layer. Black fabric absorbs sun and reads dark from the street, so pick a lighter shade from this list if you want the window to look bright from outside.
Product specs
- Dimensions
- 34 in
- Material
- Fabric upholstery
- Size
- 34 in
- Min. room
- Confirm the brackets are in the box before you drill
- Assembly
- Moderate · about 2 hours, two people
- Best for
- Tall living room windows needing real darkness
Dimensions and capacity from the product page when available. Room notes use our clearance standards for this category.
Why it makes the list
- The 72-inch drop covers full-height windows that most 64-inch shades leave uncovered at the sill.
- Aluminum alloy rods top and bottom keep the bar heavy enough to hang level instead of curling at the hem.
- The insulating coating is built into the fabric itself, so there is no separate liner to separate or wrinkle over time.
What to keep in mind
- Black fabric soaks up afternoon sun and will feel noticeably warm to the touch on a south-facing window.
- The built-in valance is part of the shade rather than a separate fabric wrap, so the top edge looks tidy but plainer than the linen-wrapped TWODRAPES.
Before you buy
Run this list after you pick a piece and before checkout.
- Tape the footprint. Mark length and depth, including chair swivel or drawer pull-out.
- Check the path in. Box size has to clear stairs, elevators, and turns.
- Flooring and legs. Soft floors need pads. Uneven floors need adjustable feet or shims.
- Use case. Confirm storage, seating count, or table height matches how you actually live.
- Assembly time. Plan tools and a second pair of hands when the build is multi-hour.
- Return terms. Keep cartons until the piece sits correctly in the room.
How we made this list
We compared 11 options for cordless roller shades on footprint, build cues, and everyday use. Vague dimensions and near-duplicate layouts were cut.
- Room fit. Published size had to be clear enough to tape out.
- Build and stability. We favored solid joinery cues over styling-only claims.
- Daily use. Storage access, seating comfort, and cleaning reality mattered.
- Cut duplicates. Similar products kept the clearer sheet and stronger score.
FAQ
How do you measure for a cordless roller shade?
For an inside mount, measure the glass width at the top, middle, and bottom, and use the narrowest number. Measure the height from where the bracket will sit down to the sill.
What does light filtering mean on a roller shade?
Light-filtering cloth softens daylight and still lets some through. Blackout cloth is denser and blocks most of the light when the shade is down.
Where should I buy these?
Use the Buy buttons on this page for the exact products we compared. Confirm width, fabric, and the return policy on the product page before checkout. Prices move frequently.
This is general home-furnishing guidance, not structural or safety advice. Confirm weight limits, tip-over anchors, and local building rules where they apply.
Affiliate disclosure: we may earn a commission from Buy on Amazon links. Prices and availability change.






























































